What To Do If Windows Doesn’t Recognize Your SSD in 2022

Wait a little longer before running back to the shop.

An SSD not only ensures that your computer boots at lightning speed, but is also quieter, more energy-efficient and more reliable than a hard disk (HDD).

Read Must: How to Replace Your HDD With A [Lightning-Fast SSD]

An excellent upgrade! You will only just see: your SSD is not recognized by Windows. Don’t worry, because with this article I’m going to try to help you.

You Need this if SSD is Not Recognized

SSD is Not Recognized

You don’t need anything extra for the step-by-step plan below. Only (of course) your PC or laptop!

Step 1: Is the SSD compatible?

Before you get started, it is advisable to double check whether the SSD is compatible with your PC or laptop . Check the manufacturer’s website or check the manual again. Is the SSD compatible? Then proceed to step 2. If not, you will likely need to return it and replace it with a compatible model.

Step 2: Go to Disk Management

To get to the solution, first of all you need to be in Disk Management and perform some steps there . To do this, right-click on the start button (the Windows icon) and then on Disk Management.

Step 3: Check if your SSD is initialized

Initializing is preparing for first use . If your SDD has not yet been initialized, a dialog box will normally appear on your screen as soon as you open Disk Management .

If you still need to initialize the SSD , click Ok and you will have to choose from MBR ( Master Boot Record ) and GPT ( GUID Partition Table ) . GPT is a newer, more advanced standard , but MBR is the most compatible and is often necessary on older operating systems.

Sometimes the window does not appear, but you still see that the disk has not yet been initialized. In that case, right-click on the SSD and choose Initialize Disk .

Step 4: Check if your SSD has a drive letter

Is your drive initialized, but the SSD is still not recognized? Then see if a drive letter is missing . An example of a drive letter (also called a drive letter) is C: or D: .

Windows usually automatically assigns a letter to internal and external drives. If this does not happen, fortunately it is still easy to solve .

In Disk Management , right click on the SSD and then click Change drive letter and paths . Click Add or Change , select a drive letter – it doesn’t matter which – and click Ok .

Step 5: Assign the SSD – if necessary

If you see the Unassigned message , this is probably the problem. An SSD must be allocated for it to work fully. This indicates that it is ready to save data . With this action you also format the SSD immediately.

Right click on the SSD and then click New Simple Volume . In the window that opens, click Next. Then choose a volume size and click Next again .

Then the formatting starts. You then have to choose from FAT32, NTFS or exFAT . The most modern file system is NTFS and usually the best choice . FAT32 is the oldest variant, but it is again compatible with 32-bit operating systems, and exFAT is a more modern variant.

Leave the cluster size as it is and give the SSD a name. Click Next and then Finish.

Step 6: Formatting Re-formatting the SSD

Another possible cause is that Windows does not support the file system of the SSD , for example if it shows as RAW.

The SSD must then be (re)formatted. This means that the disk is completely emptied . If it is an older SSD with files on it, make a backup first so as not to lose it.

How do you format an SSD? In Disk Management , right click on the SSD and then click Format . Choose a name for the drive and then the file system. The previous step explained the choice between the file systems FAT32, NTFS and exFAT .

The cluster size can stay that way. You can check Quick format , but for best results leave it off. It may take a little longer, but the formatting will be more thorough. After that, click on Ok.

Step 7: Reinstall the driver

Finally, reinstalling the driver is worth it. You do not need to be in Disk Management for this, but in Device Manager . Search for the name of the SSD and right click on it. If you see Enable device , the installation has not yet taken place and choose this.

Otherwise, click Remove device . After this, restart your PC or laptop. It will automatically reinstall the driver when it reboots.

Step 8: Check if the SSD is not broken

Check if the SSD is not broken

If the above steps do not help, your SSD may be broken. You can find out by installing it in another PC or laptop . If it still doesn’t work, contact the company where you bought it.

Conclusion

I hope the issues with your SSD have been resolved and you can now enjoy the benefits it provides. If you have any questions, please let us know!